TECH-TALK WEEK @PLASTICS & RUBBER INDONESIA
Injection molding is a process used in manufacturing parts or mechanical components in a process that involves material injection into a mold. It’s a versatile process that has made production of low cost and high cost plastic parts easy.
There have been advancements in the world of injection molding and some of the new technologies in the world of injection molding, in this opportunity PT. Pamerindo Indonesia has successfully held a webinar with its estemmed speakers used this platform to cover all new advancements in Injection Molding- Injection using gas; Injection using foam; Thin-wall method and Multi-component method.
Taking the theme of New Technological Solutions to Improve The Injection Moulding Process, the webinar took place on Tuesday, 15 September 2020, at 10.00 WIB (am/GMT+7) and was run by key players in the industry:
Paulus B. Napitupulu,
Senior Advisor for Indonesia Mold and Dies Industry Association (IMDIA)
Ir. Hendro Sat Setijo Tomo, M.Si,
Specialist Injection Molding, Balai Teknologi Polimer – BPPT
Tjen Khin Yau,
Director – PT. Catur Putra Makmur Sejahtera
THE AGENDA
Welcome and Introductions
Tune in, sit tight, and get yourself comfortable. Hosted by PT Pamerindo Indonesia, we will introduce you to the speakers and the webinar agenda.
Association Insights
Hear from Mr. Paulus B. Napitupulu, Senior Advisor for Indonesia Mold and Dies Industry Association (IMDIA)
- Near Future Trends VS People Readiness in Indonesia
Industry View
Ir. Hendro Sat Setijo Tomo, M.Si, Specialist Injection Molding, Balai Teknologi Polimer – BPPT
- Dasar, Skema, Proses Injeksi Molding, dan teknologi baru yang ada dalam injeksi molding.
Industry View
Hear about the technologies of injection moulding machine by Mr. Tjen Khin Yau, Director – PT. Catur Putra Makmur Sejahtera
- Updated Technologies of Injection Moulding Machine from PT. Catur Putra Makmur Sejahtera
Tuesday, 15 September 2020 | 10.00 am (WIB/GMT+7)
| 10.00 – 10.05 | Welcome and introduction hosted by PT Pamerindo Indonesia |
| 10.10 – 10.25 | Association insights: IMDIA (Indonesia Mold & Dies Industry Association) |
| 10.30 – 10.35 | First polling and general information |
| 10.40 – 10.55 | Industry View: Ir. Hendro Sat Setijo Tomo, M.Si – Specialist Injection Molding, Balai Teknologi Polimer – BPPT |
| 11.00- 11.05 | Second polling and general information |
| 11.10 – 11.25 | Industry View: Tjen Khin Yau – Director, PT. Catur Putra Makmur Sejahtera |
| 11.30 – 12.00 | Q&A and wrap up |
*Subject to change without prior notice
TECHNICAL INFO
Our webinar will be conducted using a presentation with an audio format. After you complete your registration, you will receive an automatic confirmation email with details for joining our webinar. See you on the e-stage!
TECH-TALK WEBINAR VIDEO
TECHNICAL INFO
Our webinar will be conducted using a presentation with an audio format. After you complete your registration, you will receive an automatic confirmation email with details for joining our webinar. As you build your future information and experience, you can check the recording webinar video and download the presentation material, a minimum of 2 working days after the webinar is done.
See you at the e-stage!
Thanks To Our Sponsor
CALLING FOR SPEAKERS
JOIN US AND SHARE YOUR EXPERIENCE
The industry needs your experience and moreover it’s time for the industry to rise and shine together! We need your expertise and support to share the information. Contact our nearest sales representative and they will inform you of the next steps and the benefit of joining Plastics & Rubber Indonesia Tech-Talk Webinar.
See you on e-stage!
